Heat Pumps & Mini Splits

Heat Pump Installation

One system that heats and cools your whole home efficiently — cold-climate heat pumps, right-sized and professionally installed, with the largest Mass Save rebates we handle for you.

4.9 Google rating · BBB A+ · Licensed & Insured
Google 4.9★ BBB A+ Licensed & Insured Financing Available Mass Save Partner Family Owned Since 1988 Free Estimates

Heat Pumps & Mini Splits

Heat Pump Installation in Southeastern Massachusetts

A heat pump is the rare upgrade that does two jobs at once: it cools your home in summer like a high-efficiency central air conditioner, and it heats your home in winter without burning oil, propane, or gas. Instead of creating heat, it moves heat — pulling warmth from the outdoor air even on cold New England days — which is why a modern heat pump can deliver several units of heat for every unit of electricity it uses. For most Southeastern Massachusetts homes, that's the most efficient way to stay comfortable year-round from a single, quiet system.

Quality Home Heating & Air has installed heating and cooling across the South Shore and South Coast since 1988, and heat pumps are now one of the smartest investments we help homeowners make. We install whole-home ducted heat pumps that connect to your existing or new ductwork, so every room is served by one balanced system — no window units, no separate furnace and AC to maintain. Every installation starts with a proper Manual J load calculation, so the system is sized to your home, not guessed at.

Heat pumps are also the headliner of the Mass Save program — they carry by far the largest incentives of anything we install, and those rebates stack on top of our financing. Between the rebate dollars, the year-round efficiency, and the savings versus oil or electric-resistance heat, a heat pump often pencils out far better than homeowners expect. We'll walk you through the real numbers honestly so you can decide with confidence.

Signs a heat pump is right for your home

  • You're replacing an aging AC and an aging furnace or boiler at the same time
  • You heat with oil, propane, or electric-resistance and want lower, more stable bills
  • You want efficient heating and cooling from one system instead of two
  • You're interested in capturing the large Mass Save heat-pump rebates
  • You'd like to reduce or eliminate your dependence on fuel deliveries
  • Some rooms are too hot or too cold and you want even, whole-home comfort
  • You want a quieter, more modern system with better humidity control
  • You're building, adding on, or finally finishing a comfort problem the right way

What causes these problems

Most homeowners switch to a heat pump at a natural turning point — an air conditioner that's failed, a furnace or boiler near the end of its life, or fuel bills that keep climbing. Rather than replace two aging systems separately, a single heat pump handles both heating and cooling, which simplifies the home, the maintenance, and often the cost. When you're already facing one replacement, adding the second job for a modest difference is frequently the better long-term decision.

The technology has changed dramatically, and that's the part homeowners are often surprised by. Today's cold-climate heat pumps use variable-speed inverter compressors that keep producing real heat well below freezing — these are not the underpowered heat pumps of decades past. Rated for the temperatures we actually see in Southeastern Massachusetts, a properly sized cold-climate system carries the home through the bulk of our winter efficiently, ramping up and down to match demand instead of cycling hard on and off.

You don't always have to choose all-or-nothing, either. A heat pump can be installed as a full replacement, or it can be paired with your existing furnace or boiler in a dual-fuel setup — the heat pump does the efficient heavy lifting most of the season, and your existing heat backs it up on the coldest days. We'll help you decide which approach fits your home, your ductwork, and your budget, and we'll size the system so it performs the way it's rated to.

How it works

Our process

  1. 1

    In-home assessment & load calc

    We evaluate your home, ductwork, and electrical, then run a Manual J load calculation to size the heat pump correctly for both heating and cooling — sizing it for our climate, not by rule of thumb.

  2. 2

    System options & honest recommendation

    You get clear good/better/best options — full heat pump versus dual-fuel pairing, efficiency levels, and cold-climate capacity — with upfront pricing and no pressure.

  3. 3

    Mass Save rebates & financing handled

    Heat pumps carry the largest Mass Save incentives we work with. We identify what you qualify for, handle the paperwork, and set up financing so the rebates stack on top.

  4. 4

    Old equipment removed

    We safely recover refrigerant where applicable and remove and responsibly dispose of the old equipment we're replacing, protecting your home throughout.

  5. 5

    Professional installation

    Outdoor unit, indoor air handler or coil, line set, electrical, condensate, ductwork adjustments where needed, and a new thermostat — installed to code and manufacturer spec.

  6. 6

    Startup & commissioning

    We verify refrigerant charge, airflow, and heating and cooling performance so the system delivers its rated efficiency in both modes, not just 'runs.'

  7. 7

    Walkthrough & cleanup

    We register your warranty, show you how to get the most from the system and thermostat in every season, and leave your home cleaner than we found it.

What's included

  • Manual J load calculation sized for heating and cooling
  • Code-compliant, professional installation
  • Removal & responsible disposal of replaced equipment
  • Cold-climate outdoor heat pump + matched indoor air handler or coil
  • New line set where required, with proper evacuation
  • Electrical disconnect/whip, wiring, and condensate handling
  • Ductwork adjustments or transitions where needed for balanced airflow
  • New programmable or smart thermostat configured for heat-pump operation
  • Full startup, airflow & dual-mode performance verification
  • Mass Save rebate paperwork and manufacturer warranty registration

Request Heat Pump Installation

Tell us what you need — we’ll get right back to you.

Why QHH

Why homeowners choose Quality Home Heating & Air

Family-owned and serving Southeastern MA since 1988
Every install sized with a Manual J load calculation
The largest Mass Save rebates we handle — plus financing, stacked
Cold-climate systems chosen for real New England winters
Fully commissioned in both heating and cooling — verified, not just 'running'

The brands we install

LennoxGoodman

These are the lines we install and recommend — and we repair & service every major brand.

Affordable ways to pay

Financing & Mass Save rebates

Rebates are just one piece — we pair them with flexible financing so the right system fits your budget.

Flexible Financing

  • 0% promotional financing
  • Terms up to 60 months
  • Long-term plans up to 10 years
  • Low monthly payments · fast approval

Mass Save Rebates

As a Mass Save partner, we help you claim the rebates and HEAT Loan financing you qualify for on eligible high-efficiency equipment — and we handle the paperwork. Rebates stack on top of your financing.

Good to know

Heat Pump Installation — frequently asked questions

Yes. Today's cold-climate heat pumps use variable-speed inverter technology that keeps producing real heat well below freezing — far beyond the heat pumps of decades ago. We size and select systems rated for the temperatures we actually see in Southeastern Massachusetts, so a properly installed cold-climate heat pump carries your home efficiently through the bulk of our winter. On the very coldest days, supplemental or backup heat picks up any remaining load.

Over 260 Five-Star Reviews

Old Fashioned, Quality Service® See why your neighbors across Southeastern Massachusetts trust Quality Home Heating & Air.

“Kevin was great. He took the time with us to describe all options, and the pros and cons of each. His men did the job quickly and efficiently, leaving no trace other than the work they had done. It has only been a few days since they put in our system, but the difference from our old system is evident.”
Robert Richard
5.0
Sample
“From the first call to the final walkthrough, the whole team was professional and on time. Our new system runs better than we expected and the price was fair.”
Sample Customer
5.0
Sample
“Honest, knowledgeable, and clean. They explained every option, never upsold us, and had our system running the same day.”
Sample Customer
5.0
GoogleFacebookBBB A+

Ready for heat pump installation?

Old Fashioned, Quality Service® Proudly serving Southeastern Massachusetts.

Call Now Book Online